UNIVERSAL 48V WALL PLUG POE INJECTOR FOR MOST MITEL/CISCO/POLYCOM/AASTRA PHONES

This is our most popular POE power supply. We have not found a POE phone that does not work with this unit.

If you are trying to power up other types of POE devices please ensure your unit does not require more then 500 milli amps.

The U48V1A-POE-WP-NA Power Over Ethernet Power Sources are a low cost Passive POE inserter/injector
compatible with a wide variety of passive POE powered devices. They are midspan devices, which means there is a
data-in port and an output port with data and power. The RJ45 connectors are shielded so that the CAT5 cable
shielding path is not interrupted between the data source (computer, router or switch) and the device being supplied
with POE power. The small size and convenient wall plug design helps keep the installation simple and clean. The low
cost makes them very affordable.
They work by supplying power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). The
Ethernet spec supports distances up to 100m (328 feet).
The units are autoranging so that they accept AC inputs from 90VAC to 264VAC (50/60 Hz) and they supply
regulated DC Voltage at the POE output. They have various protections for short circuit, overload and overvoltage.
They have power output of up to 24W. They are available in 15V, 24V and 48V DC Output with load regulation within
5%. They have an LED to indicate power on.

	Output:	48V DC 500mA - Please do not order if your unit requires more than 500 MilliAmps
	Input Current:	1A
	Efficiency:	80% Min
	Line / Load Regulation:	3% / 5%
	Ripple / Noise:	200mV p-p
	Turn-On Delay:	2 Seconds Max
	Rise Time:	40 mS Max
	Protections :	Auto Recover Over-Voltage, Short Circuit, Over-Current
	Safety and EMC Standards:	UL 60950, CE
	Environmental Standards:	RoHs
	Operating Temperature:	-10 to +40°C (14 to +104°F)
	Operating Humidity (RH):	5% - 90%
	Storage Temperature:	-20 to +85°C (-4 to +185°F)
	Case Dimensions:	83 x 44.5 x 34.3 mm (3.25 x 1.75 x 1.35”)
	Weight:	114g (4 oz)
	AC Plug Type:	North American
	Network Connector Type:	RJ45 Shielded
	POE Type:	Passive POE ( Pins 4,5 V+, Pins 7,8 V-)

	*this item may not be compatible with some older Cisco Models that use Pre-Standard power and not the IEEE 802.3af Standard